- Открыть для себя IQOS
Что такое IQOS?
- Нагревание табака
Настоящий табак, настоящий прогресс
- Преимущества IQOS
Основные причины перехода
- Наука об IQOS
Открывая для себя науку
- Сервисы
Открыть для себя сервисы от IQOS
Самый инновационный и продвинутый
Знакомый дизайн. Улучшенный опыт․
Карманный размер. Всё в одном дизайне.
Просто и все в одном
- Открыть для себя IQOS
Что такое IQOS?
- Нагревание табака
Настоящий табак, настоящий прогресс
- Преимущества IQOS
Основные причины перехода
- Наука об IQOS
Открывая для себя науку
- Сервисы
Открыть для себя сервисы от IQOS
Онлайн-диагностика lil SOLID 2.0
Если с lil SOLID 2.0 что-то не так, прежде всего нужно проверить, заряжен ли он.
Connect the device to the supplied USB Cable and plug the AC Power Adaptor to the electrical outlet. It takes approximately 2 hours to fully charge the Iil SOLID device. The charging is indicated by the blinking State LED. When the device is fully charged, the light turns off.
The Iil SOLID 2.0 device does not require a full charge to work, however we recommend to fully charge it before the first use.
To check the charge level of the lil SOLID 2.0 device push the button or plug the device in a power outlet using the official USB Cable and AC Power Adaptor. The charging status of the device is displayed as follows:
• Blue - 100-60%, charged
• Ice blue - 60-30%
• Orange - 30-1%, should be charged
• Red - out of battery, needs to be charged.
The Iil SOLID 2.0 device does not require a full charge to work, however we recommend to fully charge it before the first use.
To check the charge level of the lil SOLID 2.0 device push the button or plug the device in a power outlet using the official USB Cable and AC Power Adaptor. The charging status of the device is displayed as follows:
• Blue - 100-60%, charged
• Ice blue - 60-30%
• Orange - 30-1%, should be charged
• Red - out of battery, needs to be charged.
Перезагрузка lil SOLID 2.0
If your lil SOLID 2.0 is charged, but still not working, the next step is to reset the lil SOLID 2.0 device.
Press the button for 10 seconds until the LED lights blink twice. Did the lights blink, so the resetting was successfully done.
Press the button for 10 seconds until the LED lights blink twice. Did the lights blink, so the resetting was successfully done.
Чистка lil SOLID 2.0
Does it feel difficult to draw on your heatsticks while using your lil SOLID 2.0? Not getting enough aerosol when using your lil SOLID 2.0? These issues can likely be resolved by using the cleaning tool and cleaning sticks.
Cleaning your lil SOLID 2.0 regularly and with the right tools can solve some of the issues you may be experiencing with your lil SOLID 2.0.
Cleaning your lil SOLID 2.0 regularly and with the right tools can solve some of the issues you may be experiencing with your lil SOLID 2.0.
lil SOLID 2.0: проблемы с температурой
Do you see a red blinking light on your lil SOLID 2.0? This could be because your device is too cold or too hot.
lil SOLID 2.0 operates in a temperature range between -20°C and 60° C. If the ambient temperature is low, try warming the lil SOLID 2.0 in your hand for at least 1 minute. If it is too hot, take it with you to a colder place and it should be working again once it has cooled down.
lil SOLID 2.0 operates in a temperature range between -20°C and 60° C. If the ambient temperature is low, try warming the lil SOLID 2.0 in your hand for at least 1 minute. If it is too hot, take it with you to a colder place and it should be working again once it has cooled down.
Сломалось игла или есть другие физические повреждения?
Check to see if your lil SOLID 2.0 has a broken pin or any other physical damage. If it does, we are sorry that this happened to you. Please contact Customer Care and we will support you with this issue.
Sometimes cleaning the lil SOLID 2.0 can damage the pin inside your device. Be careful not to exert force onto the pin when cleaning your lil SOLID 2.0. Also ensure you never twist your tobacco stick while it's in the holder. This movement can damage the heating pin and disrupt your lil SOLID 2.0 experience.
Sometimes cleaning the lil SOLID 2.0 can damage the pin inside your device. Be careful not to exert force onto the pin when cleaning your lil SOLID 2.0. Also ensure you never twist your tobacco stick while it's in the holder. This movement can damage the heating pin and disrupt your lil SOLID 2.0 experience.
Still have questions?
You can contact us the way you want.
An easy way to find answers to your questions.
