IQOS 3 Multi

Press IQOS 3 MULTI Button for 1 second (short press). The Battery Status lights will turn on and indicate the level of charge: 4 LEDs = more than 75% charged 1 LED = low charge, needs to charge.

It takes approximately 75 minutes to fully charge the IQOS 3 MULTI device from an electrical outlet. Only charge IQOS 3 MULTI device using the supplied AC Power Adapter and USB cable.

IQOS 3 MULTI device does not require a full charge to work, however we recommend to fully charge the device before the first usage. If the IQOS 3 MULTI pocket charger is fully charged, you may use the holder up to 10 times.

You can reset your IQOS 3 MULTI device by pressing and holding the button for 10 seconds and then releasing. The lights will fade in and out to confirm a reset.

IQOS 3 MULTI vibrations are activated in the following situations։

• At the start of the heating (once you press the button to start) - one vibration
• When the device is ready to be used - two vibrations
• When the experience is nearly complete (30 seconds prior to the end of the tobacco session) - two vibrations.

Any white light indicates that the device performs various operations, like charging, re-initialization, ready to use, fully charged etc. Any red light indicates that there is a device error or device operates outside its operating temperature (0 - 40°C). If the Button light blinks white twice, this indicates that the device operates outside it's operating temperature. Please wait until the device is within temperature limits. If the Button light blinks red, this might indicate a device malfunction. Please, perform a reset of your device and try again. Still no luck? You can go through self diagnostics through our Viber Assistant, contact Customer Care or visit IQOS Stores nearby

IQOS 3 MULTI is designed to work in a wide range of temperatures, but the best temperature for sticks is between 0℃ and 50℃.